Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 03950 | NAVAL INVENTORY CONTROL POINT MECHAN |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.810 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT KEYWAY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-16166,ALLOY 630 MIL SPEC SINGLE MATERIAL RESPONSE |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 15.000 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |
| AMDL | FIRST END DIAMETER | 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AMDG | FIRST END KEYWAY DEPTH | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |